含螺双芴微孔离聚物的膜电极组件在干态 H2/Air 下峰值功率密度达 1.04 W cm−2
Molecular Engineering of Membrane Electrode Assemblies With Superior Humidity Robustness for Fuel Cells
在阴极催化层引入含螺双芴的微孔离聚物 QTPSp 后,PEMFC 局部氧传输阻力降低 54%,全干 H2/Air 条件下峰值功率密度达 1.04 W cm−2,湿度鲁棒性参数提高 2.5 倍。
- 背景
- 聚合物电解质膜燃料电池在环境湿度波动时性能难以稳定,核心难点在于难以在整个湿度范围内维持氧气扩散。阴极催化层中的局部氧传输受限被认为是关键瓶颈之一。
- 做法
- 研究将含螺二芴结构的微孔离聚物(QTPSp)引入阴极催化层,用以调控电极内的局部氧传输。设计思路是利用螺二芴刚性、扭曲的构型限制主链构象自由度、阻碍链堆积,从而产生持久的亚纳米自由体积,并形成具有双连续畴和大量空隙的分级多孔结构。性能评估在完全干燥的 H2/Air 条件下进行,对比对象为 QTPSp-4% 基膜电极组装(MEA)。
- 结论
- 定量分析显示局部氧传输阻力下降 54%,说明微孔离聚物结构在缓解局部氧传输限制的同时维持了足够的离子传输。燃料电池在完全干燥 H2/Air 下峰值功率密度达到 1.04 W cm−2。湿度稳健性参数提高 2.5 倍,QTPSp-4% 基 MEA 在高功率密度下对湿度的敏感性较低。
- 意义
- 结果指向一条通过离聚物分子结构设计调节催化层局部氧传输的路径:螺二芴带来的自由体积与多孔形貌被用于在干态条件下保持氧扩散,对应湿度稳健性参数的量级提升,为宽湿度工况下的膜电极设计提供可参考的材料方案。
原文摘要
出版方登记 · CrossrefIt remains a substantial challenge to achieve stable performance of polymer electrolyte membrane fuel cells (PEMFCs) under fluctuating ambient humidity, largely owing to the difficulty of sustaining oxygen diffusion across the full humidity range. Here, we incorporate a spirobifluorene‐containing microporous ionomer (QTPSp) into the cathode catalyst layer to regulate local oxygen transport in PEMFC electrodes. The rigid, contorted spirobifluorene moieties restrict backbone conformational freedom and frustrate chain packing, generating persistent sub‐nanometer free volume and a hierarchical porous architecture with bicontinuous domains and abundant voids. Quantitative analysis reveals a 54% reduction in local oxygen transport resistance, demonstrating that the microporous ionomer architecture effectively alleviates local oxygen‐transport limitations while maintaining sufficient ion transport. The fuel cell achieves a peak power density of 1.04 W cm −2 under fully dry H 2 /Air. The humidity robustness parameter increases 2.5‐fold, showing that the QTPSp‐4%‐based MEA maintains high power density and low sensitivity to humidity.
页面未能读取全文,以上为出版方登记的摘要;方法与图表见原文
本页是 AI 精读,不转载论文原文;完整论文(含方法、图表与参考文献)见原文
来源:Small · doi.org