跳到正文
Small· Pawar·· 9 天前AI 评分43

原位掠入射X射线衍射揭示压缩驱动融合肽自组装为纤维网络

Compression‐Driven Self‐Assembly of Fusion Peptides Into Fibrous Networks Revealed by In Situ Grazing‐Incidence X‐Ray Diffraction

AI 导读

原位GIXD与XRR实验显示,单轴压缩可驱动气-水界面上融合肽单分子层形成侧向分子有序与纤维状组装。FP1在中等表面压下β-折叠有序度和纤维相干性达到最大,进一步压缩则部分破坏该组织;FP4仅呈短程有序,对压缩响应有限。表面压因此被确定为调控界面肽组织的物理参数。

AI 深度导读基于原文整理的分节解读
背景
融合肽(FP)正被用作纳米尺度结构的构建单元,潜在应用方向包括纳米光刻、表面模板和仿生材料。但针对其在流体界面自组装的研究,多数依赖把组装体转移到固体基底后再做表征,因此很难判断观察到的结构究竟形成于界面本身,还是在转移与干燥过程中产生。
做法
研究改用掠入射X射线衍射(GIXD)并结合X射线反射(XRR),在空气—水界面对FP单层进行原位探测,追踪其在单轴压缩过程中的结构演变,而不是先转移到基底再测。比较对象为FP1与FP4两种融合肽,观察量包括侧向分子有序与纤维状组装的出现。
结论
原位结果表明,压缩会驱动流体界面处形成侧向分子有序和纤维状组装。FP1在表面压升高时β-折叠有序性与纤维相干性增强,面内相关在中间压力达到最大,继续压缩则会部分破坏这种组织。FP4只呈现短程有序,对压缩的响应有限。
意义
这组对比把表面压确定为控制肽在流体界面组织方式的物理参数,也为以压缩为导向制备可调肽纳米结构提供了依据。

原文摘要

出版方登记 · Crossref

Fusion peptides (FPs) have emerged as versatile building blocks for nanoscale architectures with potential applications in nanolithography, surface templating, and bioinspired materials. However, most studies of FP self‐assembly at fluid interfaces rely on ex situ characterization after transfer to solid substrates, making it difficult to determine whether the observed structures form at the interface or during transfer and drying. Here, we employ grazing‐incidence X‐ray diffraction (GIXD), combined with X‐ray reflectivity (XRR), to directly probe in situ the structural evolution of FP monolayers at the air‐water interface during uniaxial compression. The results reveal that compression drives the development of lateral molecular order and fibrillar assemblies at the fluid interface. For FP1, increasing surface pressure promotes β‐sheet ordering and fibril coherence, with maximum in‐plane correlation at an intermediate pressure, whereas further compression partially disrupts this organization. In contrast, FP4 exhibits only short‐range order with limited response to compression. These findings identify surface pressure as a physical parameter for controlling peptide organization at fluid interfaces and provide a basis for compression‐directed fabrication of tunable peptide nanostructures.

页面未能读取全文,以上为出版方登记的摘要;方法与图表见原文

本页是 AI 精读,不转载论文原文;完整论文(含方法、图表与参考文献)见原文

来源:Small · doi.org