全真空钙钛矿/硅叠层电池借 OLED 用 p 型掺杂剂达 29.1% 效率
Rational Selection of Hole Contacts with an Organic Light-Emitting Diode Industry p-Dopant for Fully Vacuum-Processed Perovskite/Silicon Tandems
一篇发表于 ACS Energy Letters 的研究报道了全真空工艺制备的钙钛矿/硅叠层电池,光电转换效率达 29.1%,其做法是将 OLED 产业的 p 型掺杂剂 NDP-9 与可蒸镀芳胺空穴传输材料引入钙钛矿叠层。
- 背景
- 要把钙钛矿/硅叠层电池转向全真空制造,需要真空兼容的p掺杂空穴接触层。相比基于C60的电子接触,掺杂空穴传输材料(HTM)的选择标准仍不成熟;在OLED产业中已有可蒸镀的p掺杂剂和芳胺类HTM,但如何为钙钛矿叠层挑选合适的组合尚无清晰判据。
- 做法
- 作者把OLED工业用的p掺杂剂NDP-9和可蒸镀芳胺HTM引入钙钛矿叠层,制成全真空处理的钙钛矿/硅叠层器件。在接触层筛选中比较了TaTm、Spiro-TTB和TAPC三种HTM,并对照理论计算得到的宿主–掺杂剂相互作用强度,以及常规的光学、振动和光电子能谱表征结果。除叠层器件外,还用1.70 eV宽带隙单结电池评估接触效果。
- 结论
- 全真空处理的钙钛矿/硅叠层电池获得29.1%的光电转换效率,作者称这是全真空沉积钙钛矿顶电池叠层中报道的最高效率之一。接触选择并不遵循理论计算给出的宿主–掺杂剂相互作用强度,也不遵循常规光学、振动和光电子能谱的结果;器件层面的电荷提取与复合指标才把NDP-9掺杂的TaTm识别为最有效的接触。采用该接触的1.70 eV宽带隙单结电池效率为20.0%。
- 意义
- 结果说明,筛选真空兼容的掺杂空穴接触时,以器件层面的电荷提取和复合表现为依据的传输型筛选,比依据理论相互作用强度或常规谱学表征更可行。对需要全真空工艺的钙钛矿/硅叠层而言,这提供了一条从OLED产业已有的p掺杂剂和可蒸镀HTM中挑选接触材料的实际路径。
原文摘要
出版方登记 · CrossrefTranslating perovskite/silicon tandems to fully vacuum-based manufacturing requires vacuum-compatible p-doped hole contacts, yet clear selection criteria for doped hole-transport materials (HTMs) remain underdeveloped compared with C60-based electron contacts. Here, we report a fully vacuum-processed perovskite/silicon tandem reaching 29.1% power conversion efficiency, among the highest reported for tandems with fully vacuum-deposited perovskite top cells, enabled by transferring the organic light-emitting diode (OLED)-industry p-dopant NDP-9 and an evaporable arylamine HTM into the perovskite stack. Comparing TaTm, Spiro-TTB, and TAPC shows that contact selection does not follow apparent host–dopant interaction strength derived from theoretical calculations or conventional optical, vibrational, and photoemission spectroscopies. Instead, device-level charge extraction and recombination metrics identify NDP-9-doped TaTm as the most effective contact, also yielding 20.0% in a single-junction 1.70 eV wide-bandgap cell. These results point to transport-based screening as a practical route to selecting vacuum-compatible doped hole contacts.
页面未能读取全文,以上为出版方登记的摘要;方法与图表见原文
本页是 AI 精读,不转载论文原文;完整论文(含方法、图表与参考文献)见原文
来源:ACS Energy Letters · doi.org