跳到正文
Angewandte Chemie International Edition· Wang·· 7 天前精选AI 评分61

在多重共振骨架中引入 B–S 键,实现快速反向系间窜越与简便合成的窄带发光材料

Incorporating B–S Bonds Into Multi‐Resonance Frameworks for Narrowband Emitters With Fast Reverse Intersystem Crossing and Facile Synthesis

AI 导读

研究在多重共振热活化延迟荧光骨架中引入 B–S 键,设计出同时含 B–S 与 B–O 键的 O2S2-B3N 和 MesO2S2-B3N 分子,其反向系间窜越速率常数超过 2.6×10^5 s^-1,硼化反应收率达 85%。

AI 深度导读基于原文整理的分节解读
背景
硼/氮嵌入的多重共振热活化延迟荧光(MR-TADF)发光材料适合宽色域、低功耗OLED显示,但两类问题限制了其发展和应用:反向系间窜越(RISC)速度慢,以及硼化反应带来的合成困难。
做法
作者提出把B–S键引入MR骨架的设计思路,在同一分子核内同时设置B–S键和B–O键,合成了O2S2-B3N与MesO2S2-B3N两个分子,并以只含B–O键的对照化合物作比较。引入B–S键后自旋–轨道耦合相对对照化合物增强;合成路径上硼化步骤也更为简化,产率达到85%。
结论
B–S键的引入带来显著更快的RISC,速率常数超过2.6×10^5 s^-1,同时窄带发射得以保持,半高全宽(FWHM)为22–23 nm。在非敏化电致发光器件中,MesO2S2-B3N的发射半高全宽为26 nm,外量子效率达到30.2%,与对照化合物相比效率滚降特性明显改善。
意义
这一结果把RISC动力学偏慢与硼化合成困难两个问题放在同一设计策略下处理,为高性能且易合成的MR-TADF发光材料提供了一条新路径,指向宽色域、低功耗OLED显示应用。

原文摘要

出版方登记 · Crossref

Boron/nitrogen‑embedded multi‑resonance thermally activated delayed fluorescence (MR‑TADF) emitters are highly attractive for developing wide‑color‑gamut and low‑power‑consumption organic light‑emitting diode (OLED) displays. However, their development and application face challenges of slow reverse intersystem crossing (RISC) and significant synthetic difficulties that arise from the borylation reaction. In this study, we introduce the incorporation of B–S bonds into the MR framework as a strategic design concept, achieved by designing molecules (O2S2‐B3N and MesO2S2‐B3N) that contain both B–S and B–O bonds within the same core. The introduction of B–S bonds promotes enhanced spin–orbit coupling relative to the control compound with only B–O bonds, enabling substantially faster RISC with rate constants exceeding 2.6 × 10 5 s −1 , while also facilitating streamlined borylation with yields reaching 85%. The B–S incorporation preserves narrowband emission, yielding full widths at half maximum (FWHMs) of 22–23 nm. In a non‑sensitized electroluminescent device, MesO2S2‐B3N retains a narrow emission profile (FWHM: 26 nm) and achieves a high external quantum efficiency of 30.2% with substantially improved efficiency roll‑off characteristics compared to the control compound. This B–S incorporation strategy provides a unified solution to both the slow RISC kinetics and the challenging synthesis in MR‑TADF materials, establishing a new route to high‑performance, readily accessible emitters.

页面未能读取全文,以上为出版方登记的摘要;方法与图表见原文

本页是 AI 精读,不转载论文原文;完整论文(含方法、图表与参考文献)见原文

推荐理由

把 B–S 键引入 MR-TADF 骨架,同时把 RISC 速率常数提高到 2.6×10^5 s^-1 以上并简化硼化步骤,为窄带发光材料提供一条兼顾合成与效率的设计思路。

来源:Angewandte Chemie International Edition · doi.org